We produce all kinds of vessel supply, repair, bond, engine, deck store, bunker / lube oil / hydraulic oil supply and all kinds of marine machinery and spare parts, marine radio navigation equipment exporter and stockists.

Our strength lies in good quality, competitive prices and delivery on time.

We are located near in Chittagong port and have clients all over the world.

Ship Chandler and Supplier Range

• Ship bunker supplier
• Provision for multi cultural seafarers
• Deck/Engine store supply
• Watchmen Supply daily (Day Night 24HRS) at outer anchorage & Jetty area for your vessel safety
• Chipping & Painting works
• Tank/Hatch Cleaning
• Engine room cleaning
• Cabin, saloon, medical stores & bond stores supply
• Refilling Oxygen, Acetylene, Freon R-22
• Garbage Cleaning
• Annual Inspection Of Life raft , fire extinguisher, EEBD, SCBA, CO2 system, Life boat etc. with certificate approved by International Classification

Ship Repair

• Steel fabrication
• Maine engine & auxiliary engine overhauling
• All types of motor rewinding
• Sheet metal fabrication
• Pipe work fabrication
• Welding practices including stainless/alloy, to Classification Society approval
• Engine and machinery repairs
• Marine plumbing
• Painting
• High pressure washing and short blasting
• Shipwright and carpentry
• Electrical & Electronics repairs and installations
• Marine equipment procurement

Engine and spare parts range

• Diesel Engine (Main & Auxiliary)
• Diesel engine spares (Main & Auxiliary)
• Turbo Charger Spares
• Pump Spares
• Compressor Spares
• Purifier/Separator Spares
• Heat Exchangers/Coolers
• Stern Tube Seals
• Deck Cranes & Machinery
• Anchor & Chain
• Cathodic protection (marine & industrials / applications)
• Anti-Fouling System
• Polypropylene, nylon ropes & wire ropes etc
• Navigation & communication equipment & spares
• Safety equipment
• Chart & maritime publications
• Gyro compass

If you have any requirements at present  please advise us.

You can contact our office at the above mention address for any business inquiries. We will guarantee high quality and on time delivery of the shipments at affordable prices.

For more information on the company and products, you can go to our website http://www.innovationmarine.net

Mohammad Abdul Ahad
Sales Executive
Innovation Marine International
216, Jaker Building(1st floor), P.C. Road,
Nimtala, Bandar, Chittagong, Bangladesh.
Mobile:+8801919331000
Skype: allahkeepme
Email: info@innovationmarine.net
Web: http://www.innovationmarine.net

New 6026 DWT product oil asphalt tanker with heater.

BV Class

Length 112,1 x 16,2 x dd 6 meters

Ocean Going

Engine 1 x 2574 kW

Speed 12,7 knots

Price idea USD 8.5M

Mobile+ 385-(0)919 353 292

Mail: split-hrvatska@hotmail.com

Skype: split-no1

Presentation on boats: http://www.youtube.com/watch?v=xvMus3MFLUE

MPP ship in use from 2011, ocean going, Liberia flag, Class BV, 7500 DWT , built 2009, length 108.2 m, breadth 18,20 m., D.draft 5,50 m., cranes 2 x 45/75-80 T., 250 TEU, engine 3088 kW, speed 12.4 knots, Price idea 7,5 Mil US $.

Mobile+ 385-(0)919 353 292

Mail: split-hrvatska@hotmail.com

Skype: split-no1

Presentation on boats… http://www.youtube.com/watch?v=xvMus3MFLUE

Powered by 2 ea Detroit diesel engines, engine hours 197.9 and 190.9. Driven by 2 ea Allison marine transmissions that transfer power via 2 ea large drive shafts to 2 ea water propulsion assemblies.

Craft has a 55 gallons stainless steel hydraulic tank with a hydraulic starting and steering system, it has a 625 (approx) gls stainless steel fuel tank and engine can be run on diesel fuels, most fuel/ hyd piping is stainless steel, . engines are outfitted with sea chests and selector valves for raw water cooling, the fire suppression system has 3 ea #50 fire bottles installed to a permanent piping system, . electrical system has 4 ea 12v batteries installed, craft is operated via the pilot house and the use of Morse cable controls, each space is outfitted with 2 ea bilge pumps (forward and aft), machinery space has 6 ea nitrogen filled accumulators that provide power and assistance to the hydraulic system, craft has 2 ea storage compartments, a light mast is included

LENGTH: 247′ BREADTH: 30′ DRAFT: 16′

BUILT: 1947 by Cooks & Welton, refit in 2008

CONSTRUCTION: Steel

DESIGN: Barquentine Tall Ship

ENGINE: (1) Deutz SBV8M 545 marine diesel rated @ 1,500 hp

SPEED: 10 knots

GENERATOR: (2) Caterpillar C18 425kw, 440vac, 3ph; Emergency Perkins 100kw gen.

ACCOMODATIONS: 30 staterooms for 75 people

WATER: 21,136 gallons FUEL: 15,852 gallons

EQUIPMENT: Bowthruster, life rafts, rescue boats, ship tenders

ELECTRONICS: RADAR, VHF, SSB, GPS, Auto pilot, SIMRAD compass, much more!!!

MISCELLANEOUS: Galley, lounge/bar, dining room, etc.

23m DUTCH TUG/WORKBOAT in excellent condition…

Most companies in the marine industry recognise the need for good quality brokerage workboats. The rivers are calling out for them as most of the good ones now reside in Africa. Is this one destined to join them or will some shrewd operator see the potential in this vessel and go for it while they still have the chance?

Take a look at the full specification and see for your self the quality of this vessel…

Builder: Made in Holland

Model: 23m Dutch Tug

Engines – Main Engine: The Dutch not only know how to build workboats, they know how to look after them. This excellent multipurpose workboat has the ubiquitous Bolness diesel engine and rated at 350 BHP being a very useful engine.

Bunkerage: Fuel Capacity 6000 Ltrs

Water Capacity: 4000 Ltrs

Accessories: Bow Thruster – 24 Volt generator – 240v Silent running generator – Compressor for main engine start – Pressurised water system – 3 phase generator

Number of Engines: 1

Fuel : Diesel

Drive : Shaft Drive

Fuel Capacity: 6000 Litres

Water Capacity: 4000 Litres

Description: When the Dutch make Tugs and Workboats the steel is of a thickness that  is built to last. This is a 23m workboat and has a displacement of 125 Tonnes which says it all. There is a generous well appointed forward wheelhouse and large aft deck area for equipment or cargo. A new (Jan 2008) Cormack deck crane makes her a versatile craft capable of fulfilling many roles. This is a well maintained versatile vessel in class having just passed her annual inspection. This vessel is currently being used for Tug work but is fully equipped for diving and survey works. She is equipped to a very high standard.
This vessel has an MCA workboat code of practice category 2 classification.

LOA: 23.03

LWL: 21.00

BEAM: 5.44

BERTHS: 4

DISPLACEMENT: 124.27 Tonnes

Minimum Freeboard: 0.460 m

Assigned Freeboard: 0.435 m

Accomadation: This vessel has an MCA workboat code of practice category 2 classification. That means the Crew could be expected to spend some time on board of which makes this vessel a perfect liveaboard as living accomdation is to a very high standard. If you are looking for a versatile vessel that can work on Coastal work, then this could be the vessel for you. Accommodation for 4 arranged as 3 bunks which includes a separate captains cabin. All compartments centrally heated via oil fired engine room boiler. Fully equipped galley, toilet & shower.

Decking Equipment: 2 x ships anchors and cable inc complete set new mooring ropes.

Take a look at the full specification and if you are interested in arranging a viewing then simply contact Charles King Tel: 07967 320001. This package allows the vessel to be used almost anywhere in the world and Thames Towage Ltd can arrange for this vessel to be delivered to any port in the world for you. (Delivery charge to be agreed on completion of sale)

We have the following items for sale as listed below:

Main engine to enerator, marine oil filters, marine compressors, marine heat exchangers, all engine room machinery, marine automation equipment, marine navigation equipment, marine hydraulics, marine electrical accessories, marine deck equipment, LSA, FFA, marine safety equipment, marine life saving apparatus and last but not least marine antiques.

From the worlds largest ship recycling yard situated at Alang, Bhavnagar, India.

We have been working in this field for the past 20 years and have many hundreds of satisfied customers from around the globe.

We work 24/7 to provide you with the best possible solutions for all ship owners catering for unexpected breakdowns or to maintain older machinery etc…

We have in place an excellent network and very experienced personnel to fulfill all ship owners specific requirements on time.

We believe in promising the very best quality and on time delivery at very  affordable rates.

We would like to receive your valuable inquiries for all of your marine equipment and marine spares needs.

We look forward to hearing from you soon.

Simply fill out the contact form on the right hand side —–>

Or visit our website for further details or call give us a call on the phone, we’ll be delighted to help you source all marine parts for sale.

Please contact: Parves Khan.